Imagine you are at your friend’s house and you go to the toilet. Once you have finished your business, you flush, and instead of things going down, they come up along with the water used to drain it. What would you do? It is a very embarrassing situation and will have you freaked out. Do not panic. Here, we will discuss how to unclog a toilet in the easiest way possible.

Prevent The Toilet Bowl From Filling Up.

We do not want the contents of the toilet overflowing onto the floor. Act fast and remove the lid from the tank and close the toilet flapper. The work of the flapper is to release water into the bowl from the tank. Doing this prevents the situation from getting worse.

Obtain The Right Plunger.

Funnel-cup plungers are the best ones recommended for this job. Try to ensure you have this in case of these problems occurring. They have a flanged surface extending off the bottom of its rubber cup. Soft plungers work way better than their stiff and hard counterparts. Once you have your plunger, run it under some hot water before using it to soften the rubber. This process will help us have a better seal on that toilet bowl choke repair.

Plunge The Right Way.

Use the plunger to form a secure seal on the exit hole. Most people focus on the downward push when doing plunging work yet the pullback is equally significant. Do many strokes with your plunger, up and down and flush the toilet. It is now your defining moment. If water clears from the bowl, you have successfully unclogged it. If this is not the case and water starts overflowing again, close the flapper to ensure that it stops entering the bowl. Repeat the plunge and sequence of flushing until the clog is gone.

Use An Auger.

According to SG1 Plumber, for harder clogs, you may be forced to bust the auger. It is done when the plunging does not bear any fruits. The auger is a cable-like component that you put through the hole of the toilet to loosen up the clog. They can be obtained at most stores. You will be required to snake the cable down the vent, and on that end, that you are holding, turn the crank until it stops. It will mean that you have reached the clog. It will either hook onto the clog or break it up. Once you have pinned the clog, pull it out and discard all the waste on the auger end. You should do it repeatedly to remove any left-overs that may be there.

Know When To Call Your Plumber.

If you see that water is backing up when using the sinks and showers, then it is time to call in the plumber. Water that is backing up in locations that are odd is a sign of a clogged main line, and using a plunger or an auger will not solve the problem.

Toilet clogs can be sorted out in a short amount of time. Avoid panicking and know that they can happen to anyone. With the above points, you can undoubtedly get the job done.